The main reason why the hot melt adhesive machine does not produce glue

Release time：2020/7/7 15:36:30 Click through rate：1043

In the process of using the hot melt adhesive machine, if the glue can not be discharged normally when the equipment is used, it will provide more protection for the future by analyzing some aspects correctly and understanding the main problems. The application of equipment needs a correct understanding of all aspects, so that it can achieve better effects in the future. Therefore, we should consider all aspects correctly. First, check whether the glue solution in the glue machine is sufficient, because if the glue solution or block placed in the glue machine has been used almost, and the glue machine is empty, it is naturally impossible to produce glue no matter how it runs, so first check whether the raw materials are sufficient and supplement them in time. Second, check the specific temperature: When the hot melt adhesive machine does not glue, it is necessary to check the temperature to see if it can reach the melting point temperature. If it does not reach the expected temperature, it will naturally not achieve the overall effect Third, whether the needle mouth of the glue spraying gun is blocked or not. Sometimes the hot melt adhesive machine does not release glue, which may be because the glue spraying gun is blocked. Disassemble the hose, observe whether the host machine communicates or not, and see the internal situation, which will play an important role for us. Often neglect the daily cleaning and maintenance of the equipment, which leads to the needle mouth of the glue machine being blocked by the solidification of some residual glue solution after cooling, so glue can not be discharged naturally, so pay attention to check this point. At the same time, everyone should pay attention to cleaning the equipment in time after using it in daily life. Usually, in the application process, it is necessary to check whether there is blockage, and the glue gun and filter tip should be replaced when cleaning. The above is an introduction to the reasons why the hot melt dispensing machine does not glue. If all the above reasons are not true, the reason why the hot melt adhesive machine does not glue may be due to insufficient temperature of the glue solution.

Front：Safety precautions in daily operation of hot melting
Next：How to choose hot melt adhesive machine？

Home About us Product Case News Download Honor Contactus