Jinhu Henghai Precision Machinery Co., Ltd

Jinhu Henghai Precision Machinery Co., Ltd

Contact us
 
News information

Safety precautions in daily operation of hot melting

Release time:2020/7/9 14:30:58    Click through rate:992   

1. do not operate the hot melt adhesive machine in the surrounding environment where the temperature is lower than 0 c and the high temperature is higher than 50°C ..

2. When adding hot melt adhesive, it should be added before there is at least one third of hot melt adhesive in the hot melt adhesive pot, so as to avoid adding glue when there is no hot melt adhesive in the hot melt adhesive pot, which will affect normal production.

 3. Avoid operating the hot melt adhesive machine around volatile and explosive raw materials or gases. Flammable and explosive articles cannot be stored around the spraying equipment of the hot melt adhesive machine.

4. The amount of supplementary glue shall not exceed 80% of the total volume of hot melt adhesive pot.

5. Do not operate and use the hot melt adhesive machine without proper protection device, good insulator or good protection panel. Only specially trained personnel can disassemble the machine for maintenance. Try to use it when there is no fast-moving air. Because when the hot melt adhesive nozzle assembly is exposed to the rapidly circulating air, the rapid cooling will affect the hot melt adhesive flow rate of the nozzle assembly, and the phenomenon of wire drawing is easy to occur.

Front:Matters needing attention in the use of hot melt adhesive machine
Next:The main reason why the hot melt adhesive machine does not produce glue
 
Home          About us           Product           Case          News          Download          Honor           Contactus
All rights reserved by Jinhu Henghai Precision Machinery Co., Ltd    Address: Daxing Industrial Zone, Jinhu, Jiangsu
Manager: Mr. Ye Tel:18652339870      Technical support: Mr. Hu Tel:18262709789