Common maintenance methods of automatic hot melt glue machine!

Release time：2021/11/11 11:05:23 Click through rate：915

The daily maintenance of hot melt glue dispenser is very different from that of ordinary glue dispenser, mainly because the glue does not need to be cleaned repeatedly in the daily maintenance of hot melt glue dispenser, so the daily maintenance becomes very convenient. What is the maintenance method of hot melt glue machine after a period of time? In addition, what is the improvement effect on the normal use of the machine? Today, I'd like to introduce the routine maintenance method of automatic hot melt glue machine.

Hot melt glue machine is a common automatic hot melt glue machine. This equipment belongs to desktop three-axis gluing machine. With hot melt glue distribution valve and temperature controller as the main accessories, it can effectively meet the gluing requirements of process toys and glass mobile phone shell. The applicable hot melt adhesive type is granular, with good gluing performance, high gluing accuracy and clean glue breaking. It is a good automatic gluing machine.

Daily maintenance method of hot melt adhesive machine:
1. When cleaning the dust on the surface of the machine, more dust may accumulate during the production process of the factory, affecting the overall operation structure of the machine, so it needs to be cleaned in time according to the regulations.
2. In the glue cleaning process of the workbench, although the hot-melt adhesive is not highly corrosive, the glue falling on the workbench will directly affect the balance of placing products, so it needs to be cleaned in time according to the actual situation.
3. Machine power supply: when the hot melt adhesive distributor is not used, all machine power supplies must be turned off to prevent aging of internal electrical components of the distributor and achieve the best working efficiency.
The reason why the machine needs maintenance is that the daily maintenance stage of hot melt adhesive is relatively simple. It is very different from other types of automatic dispensing machines. The maintenance is quite simple. The repaired hot melt adhesive machine can be put into production for a long time. Therefore, the regular maintenance machine basically does not have the problem of rust of such products. Although the hot-melt glue machine is made of aluminum alloy, some assembly parts are made of iron, so the operator still needs to pay attention to some problems in use.

Front：Operation manual of Henghai hot melt glue machine (full version)
Next：Simple troubleshooting of hot melt glue machine

Home About us Product Case News Download Honor Contactus