Brief summary of hot melt glue gun

Hot melt glue gun

    The spray gun adopts air switch, built-in glue and filter to prevent impurities from blocking. It can spray glue intermittently or continuously. It can be equipped with multiple nozzles. The thimble is used to open and close the rubber path. The size of the rubber quantity is related to the rubber pressure and nozzle diameter. The size of the rubber quantity can be slightly adjusted by adjusting the rubber quantity and fine adjusting the Romer. The bottom of the glue gun is equipped with an air circulation heating groove, a strong built-in temperature sensor and heating device, and the internal thimble of the body is driven by the air pressure controlled by the solenoid valve to realize the opening and closing of the glue path.

    The hose can be continuously on the back or top of the gun body. The hot-melt adhesive flows through the gun body and the nozzle from the hose. When the air pressure pushes the piston upward, the rubber path is immediately opened, and the hot-melt adhesive is blown out of the nozzle in the form of fiber by the air flow.

K-type thermocouple is adopted by default for glue gun. Can also be customized according to customer requirements.